Best 5 Solder Fume Extractor
Solder Fume Extractor
If you’ve ever assembled an electronics board or used a soldering iron, you are aware of how unpleasant solder fumes can be. However, the gasses in this situation are the real issue, not the fragrance.
Did You Use a Solder Fume Extractor?
The solder metal produces dangerous compounds like lead oxide or rosin-based flux and colophony when heated. These compounds might cause major health issues when inhaled, especially if you prefer to work long hours on your projects. This is why it’s crucial to always use a solder smoke absorber while using a soldering iron. It will draw in the dangerous vapors and either hold them in a filter or release them outside via an air vent.Now, if you work in a phone repair shop, you must have this kind of fan in your toolbox because soldering will undoubtedly be done while you’re there.
Here Best 5 Solder Fume Extractor Based On Our Complete Research
- Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber
- Aoyue 486+ Fume Extractor and Smoke Absorber
- Xytronic 426DLX Fume Extractor
- Kulannder Handy Carry Solder Smoker Absorber
- SciencePurchase Smoke Fume Absorber with Adjustable Table Clamp
1) Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber
One of the greatest solder smoke absorbers available is the Hakko FA400-04 since it is strong and portable. Although the body is made of plastic, it is strong and lightweight, allowing you to move the fan anywhere you need it.
With the help of the legs, you can set it up on any flat area near your workstation and use it either standing up or lying down. Additionally, the fan is built of ESD-safe materials, allowing you to use it without fear of an ESD mishap while working on delicate circuits.
Benefits of Hakko FA400-04 Bench Top ESD - Safe Smoke Absorber:
- ● Setting up and using the process is fairly simple.
- ● It's sturdy and lightweight by nature.
- ● This filter is simple to replace.
- ● ESD (safe design) and made of ESD-safe materials
- ● Activated Carbon filter contains over 8g of highly activated carbon
Drawbacks Of Hakko FA400-04 Bench Top ESD - Safe Smoke Absorber:
- ● You must put in effort in front of it.
- ● It has a massive plastic body But not too quiet
2) Aoyue 486+ Fume Extractor and Smoke Absorber
This compact fan absorber is intended to capture and expel soldering fumes from small to medium-sized spaces. The fan comes with a 4-inch aluminum air duct that can exhaust the fumes and a low voltage bulb to illuminate your work area, and the filter is fitted with active carbon to keep the dangerous smoke and fumes at a safe level.
Any phone repair shop would benefit from the Aoyue 486+ Fume Extractor and Smoke Absorber, but you must keep in mind that in order for it to be successful, you must operate close to it (hence the lamp).
Benefits of Aoyue 486+ Fume Extractor and Smoke Absorber
- ● Installation and use are simple
- ● Air duct made of aluminum to remove fumes
- ● Active carbon filter to absorb hazardous chemicals
- ● Activated Carbon helps filter harmful fumes and smoke
Drawbacks Of Aoyue 486+ Fume Extractor and Smoke Absorber
- ● Not very strong
- ● You need to work close to it
3) Xytronic 426DLX Fume Extractor
A huge fan for enthusiasts and those tinkering with various little devices and projects (such phones or small circuit boards)! The Xytronic 426DLX is a smoke absorber machine with a full metal construction, a long chord, and the ability to sit firmly on a level surface.
Overall, the fan is reliable and simple to use, but in order to notice a difference, you must keep it close to the project you are working on (still, this is true with every model we discussed here). You should also be aware that it makes a little noise, but not enough to be bothersome.
Benefits of Xytronic 426DLX Fume Extractor
- ● Portable and robust
- ● All-metal construction
- ● Three charcoal filters are included.
Drawbacks Of Xytronic 426DLX Fume Extractor
- ● Quite noisy
- ● Not very strong
4) Kulannder Handy Carry Solder Smoker Absorber
This is a portable solder fume extractor that you can set up anywhere you need it and conveniently put in your toolkit. It only needs an outlet and a level surface, and you may start and stop it with the ON/OFF switch as needed.
Due to the aluminum alloy substance used in its construction, the Kulannder Handy Carry Solder Smoke Absorber is resilient even if it is accidentally trodden. Additionally, it has a carbon filter that can be simply changed and is built to last for more than 50,000 hours.
This little fan is highly effective all around and is more mobile than anything else.
Benefits of Kulannder Handy Carry Solder Smoker Absorber
- ● Extremely portable
- ● Enduring and solid body
- ● Can be utilized exactly when necessary
Drawbacks Of Kulannder Handy Carry Solder Smoker Absorber
- ● The cable is made up of twisted wires rather than one continuous wire.
5) Science Purchase Smoke Fume Absorber with Adjustable Table Clamp
The SciencePurchase Absorber might be the best solder fume extractor for a professional circumstance if you’re looking for one. The fan is coupled to an adjustable arm and has a durable aluminum alloy body that you can move around as needed. This limits the fan’s portability, but if you’re only using it at one table, you don’t really need it to be as portable as the other ones.
The adjustable arm is quiet, ESD safe, and incorporates a table clamp for the best mounting.
Benefits of Science Purchase Smoke Fume Absorber with Adjustable Table Clamp
- ● Simple to use
- ● Remarkable mobility
- ● Features an activated charcoal filter and performs excellent suction
Drawbacks Of Science Purchase Smoke Fume Absorber with Adjustable Table Clamp
- ● For best suction, keep it close to where you're working.
- ● The wire is not continuous; it is twisted.
So, Finally
A solder smoke absorber is an urgent necessity for a phone repair shop because the fumes can worsen allergies and can irritate the nasal mucosa, leading to long-term issues. But as you can see, a modest gadget will do; you don’t need a large fan or an air machine to remove the smells.